Learn how to unbrick/flash this device using sp flash tool from here
Learn how to flash this device using SP MultiPortDownloadTool from here
Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloder, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
TECNO W4 SPECS
Android 5.0 (Lollipop) upgradable to Android 6.0 HiOS (Marshmallow)
5-inch Touchscreen, 720 x 1280 , IPS 267 ppi
1.3GHz quad-core Processor
MT6580
1GB RAM
16GB Internal Memory
Supports up to 64GB microSD
8MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera
Dual SIM
EDGE / GPRS
WCDMA
WIFI 802.11 b/g/n
bluetooth 4.0
3500mAh Battery
TECNO W4 STOCK ROM
W4-AW875A-A1-M-20160328
Please Leave a comment after using this ROM
Report if you cannot download this file.
Can't power ON, can't charge ... DEAD DEAD!
ReplyDeletenot dead... remove the battery and put it back then power on
DeleteThe Battery is silled. But I will try my best to reset it.
DeleteWow. THANKS FOR YOUR HELP. PROBLEM FIXED BY RESETTING THE BATTERY. IT WAS MY FIRST TIME. BUT I DID IT. THANK YOU.
DeleteBut do you know why I was trying to root. Because I want to use Rohe... Ram ecpander app... is it possible to extend the swap on Tecno w4?
thanks
ReplyDeleteHi, Hovatek, I got a tecno w4 2 days ago, and decided to root it with Twrp, following all necessary steps, the spbflah tool would not download onto the device, si I stopped the flashing, and tried to turn on my phone, but it won't come up, I searched online for issues, and was convinced the device had been bricked, and it could be recovered with sp flash tool by flashing the phone with a custom firmware, I downloaded the firmware but sp flash tool would not download onto the device, so I tried miracle box. Miracle box worked but my device would not come on, so I went searching again and discovered another variant of the ROM, which I downloaded ad used with sp flash tool, voila the download progress came on, and the phone was flashed. I plugged the phone in to a power outlet and within 5 minutes the phone came on, however with a blank display and series of varying colours, I attempted taking a screen shot, and the sound came up, meaning the I was in the Android environment, however the screen remains blank. The phone didn't fall nor hit anything, what could be wrong with it?
ReplyDeleteThe uboot is the problem... so what will happen is, if you can get another working w4. backup the files without "system and cache" then flash the backed up files to the other w4...that should fix the problem or let me know if you can't lay your hands on any. so i can backup for you then upload.. Thanks
DeleteThank you Don Steve for your closely followup. Mine (Tecno w4) has the same problem of uboot as you said and i can't lay hands on any. May you please help me by backing up and uploading the file. Thanks...
DeleteMy email is a.p.malema@gmail.com
DeleteI've uploaded the display Fix... download flash with miracle box.. Then give me your feed back... Thanks
DeleteHow do you use the display fix? can it be flashed with spflash tools?
DeleteI have got a working w4 but I don't know how to use it to restore my other w4 with displaying problem.
ReplyDeleteFollow this link
DeleteHow to Backup MediaTek Stock ROMs With Miracle Box (MTK Android Smartphones)
... then backup the files without system, cache, userdata... after a succesfull backup then write to the dead techno w4 you want to fix... thanks
Thanks you very much Sir Steve. I really appreciate your support. I will work on that and provide you with the results soon.
DeleteThank you for the file. I'm working at it now.
ReplyDeleteThe programs do not detect both the two phones and I have installed the drivers but still it says USB waiting...
ReplyDeletehave you tried removing the battery...?
DeleteThe battery is unremovable! How do I do it?
DeleteIf you have an engineer let him help you... If not then you need some courage.. Get a Screw driver loosen all the nuts on the phone then open the back cover locate the battery flex.Pull it up from the board then put it back.. try connecting back to miracle box... which windows are u running? and hope you have installed all necessary drivers?
Deletepleas pleas pleas help me itried rooting my tecno w4 and now it cant turn on
ReplyDeleteRemove and replace the battery and turn it own that should do... or hold all the buttons together.. Power + vol up and down for sometime.
DeleteHow to download this file from this Link?
ReplyDeletehttp://sh.st/SwlRk
Please help me! I boot my tecnop w4 and is need Wireless and google account Reset, How do i do@????
you don't have to download the file... if removing the google account option is your challenge then here is how to do it REMOVE GOOGLE ACCOUNT FRP LOCK ON ALL MTK DEVICES, TECHNO,GIONEE,INFINIX,WIKO,INNJOO ETC without flashing your phone
Deletei was flash my phone but he screen data lost and lights some color
ReplyDeletei was flash my phone but screen data lost and lights color
ReplyDeletehow to use display fix file ??
ReplyDeleteHelp I was trying to root my TECHNO W4 phone but I disconnected it when downloading the recovery file.Now the phone wont even power on and start.what do I do?
ReplyDeleteremove battery and put it back... or combine the whole buttons... the power the volumes for some time so it can come up..
Deletehey i want to upgrade my tecno droipad 7cs to android 7.0 nougat
ReplyDeleteplease i can't download the display fix file
ReplyDelete