Root Tecno Phantom 6 (A6)

How can I root my Tecno Phantom 6 (A6)?

There are two main steps:

Procedure

Setup ADB and Fastboot on the PC using the guide at www.dsmedia24.com/2016/07/how-to-setup-adb-and-fastboot
Extract and copy the TWRP recovery.img into the same folder as the fastboot.exe and adb.exe

Unlock the Bootloader of the Tecno Phantom 6 using the guide at unlock-bootloader-of-tecno-phantom-6-a6
Download SuperSU 2.67.zip HERE
Copy SuperSU.zip to both the phone’s internal storage
Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide; don't forget to re-enable OEM unlocking and USB Debugging)
When the phone enters Fastboot, load the TWRP recovery to the phone by typing the command below then pressing Enter

Code:
fastboot boot recovery.img

The phone should automatically boot into TWRP recovery mode
In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY
If TWRP offers to root the phone, select NO
In TWRP recovery, tap Install
Navigate to the location of the SuperSU2.76.zip and select it
Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
Reboot the phone normally
Confirm Root by installing and running Root Checker

Credits: Team Hovatek

GurusMind