This phone comes with a 5-inch touchscreen display with a resolution of 540 X 960 pixels with ~196ppi. A size of 137 x 71.1 x 10.8 mm and weighs about 210g.
Powered by 1.0GHz dual-core Spreadtrum SC8810 Processor and 512MB of RAM there’s also 4GB ROM which can be expanded up to 32GB with microSD.
There is a 5-megapixel primary camera with LED Flash and a 2-megapixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS, Bluetooth, Micro USB 2.0 also supports only 2G and 3G. Sensors on this phone include Compass Magnetometer, , Accelerometer, Proximity sensor and Gyroscope.
Powered by a 2000Mah removable battery
DOWNLOAD M-HORSE BUTTERFLY 3 STOCK ROM
F8_JHM_butterfly_3_5991G_APK_NG_NEW_V00_20170417
DOWNLOAD ROM
==============================================
==============================================
==============================================
==============================================
How to flash/upgrade this device
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)
Download an install SPD drivers from here
Download the latest version of Research Download or UpgradeDownload from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device
For a more detail tutorial with video and pictures click here
You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices
No comments:
Post a Comment